Payment & Shipping Terms:
|Max Operate Pressure:||0.6Mpa||Max Operate Temp:||110 Degree Celsius|
|Pressure Tolerance On Weld:||0.85||Surface Finish:||Mirror Polish、matt Polish Or 2B|
Cuno Filter Housing,
Industrial Air Filter Housing
Water Treatment Carbon / Sand Industrial Filter Housing Mechanical ss316 / ss304 Equipment
1.Easy to operate
2.Long life span
Attentions in using
1. When filter first into use, users should clean sand bed firstly, after that to start filtration.
2. Turn all operating valves slowly, to avoid water impact.
3. Keep sharp or hard things away from filter.
4. Keep away from fire and high temperature.
5. Make sure sand is clean when not using.
Mechanical Water Carbon / Sand Industrial Filter Housing For Revese Osmosis ss316 / ss304 through the sand bed or other filter media to finish filter. The filter bed is composed of many particles of microporous and enormous specific surface with strong physical adsorption capacity such as activated carbon,sand. Water flow through the filter bed,organic pollutants in water was adsorbed by activated carbon effectively. The available method of backwashing restore its adsorption capacity. The reasonable structure, easy to use, applicable to a variety of higher quality requirement areas.
3)Flange clamp / Thread open
Raw water passes inside water distributor into filter media layer (quartz sand), which let impurities stay at sand layer. Clean water flow out stably from water collector. When the pressure drop reaches the given value, the cleaning cycle is started. The rinse control start working at pressure drop value at 0.05-0.15MPa, return to 0.02-0.04MPa after back flushing.
Quartz sand inside tank mixed with coarse and fine sands. They are allocated above water distributor averagely. Even in back flushing, water consumption is little.
Tank inside has rubber line and plastic line for option. It is for anti-corrosion, which ensure a tank can be used 10-20years.
The completed filter control system has finished already in factory.
water treatment system
Chemical and painting filtration
Protection for RO system
Swimming pool, hotel spa, water entertainment, aquarium, fish farm
Irrigation in agriculture
Drinking water pre-treatment
Industrial recycled water, central air-condition system
1.Design pressure: 0.6 Mpa
2.Design temperature: 110 degree celsius
3.Sealing material: butyl rubber, silicone, fluorine rubber , standard configuration is silica gel seal
5.Interface form: Flange
6.Applicable filter: flat crush type PP great filter
7.Surface treatment: mirror polishing, electrolytic polishing,sandblast external surface
9.Material: SUS304, SUS316, SUS316L
|Item||Φ(mm)||H(mm)||H(mm)||H(mm)||Capacity(t/h)||Design pressure(Mpa)||Test pressure(Mpa)|
|Qty of cartridge||R:600-3000|
|Surface finish||A=Electrical polish||B=Mirror Polish|
|C=Sand blasted||D=Matt polish|
Contact Person: Mr. wei