Home Products Solenoid Operated Directional Control Valve

Cooling Type Water Cooled Perkins Diesel Generators 2000KW 4-Stroke

All Products

Concrete Autoclave (52)

Wood Autoclave (41)

Vulcanizing Autoclave (17)

Welding Equipment (59)

Pipe Welding Rotator (146)

Pipe Welding Positioners (121)

2 Way Pneumatic Solenoid Valve (104)

Solenoid Operated Directional Control Valve (85)

Manual Directional Control Valve (61)

Mechanical Control Valve (58)

Refrigerant Recovery Machine (64)

Laminated Glass Autoclave (43)

Gas Fired Steam Boiler (81)

Thermal Oil Boiler (67)

Dispensing Pressure Vessel (76)

China China Concrete Autoclave Online Market certification

The company considerate after-sales service ,And try their best to meet the requirement of customers. We will be a long-term cooperation.

—— Albert

Cooperation is very satisfactory and the Company of the past few years, we are very willing to continue long-term cooperation.

—— Dean

I want to say that your products very good. Thank you for all your suggestion, also good after sales service.

—— Mr Abílio Cipriano

I'm Online Chat Now

Cooling Type Water Cooled Perkins Diesel Generators 2000KW 4-Stroke

Large Image : Cooling Type Water Cooled Perkins Diesel Generators 2000KW 4-Stroke

Product Details:

Place of Origin:	Perkins Engine, assembled in China
Brand Name:	HIDIER-Perkins
Certification:	CE, CSA, NOISE, GS, EC-II, EPA, CARB, GOST.
Model Number:	HDP2000/S

Payment & Shipping Terms:

Minimum Order Quantity:	1pcs
Packaging Details:	Plywood box
Delivery Time:	Within 30 days
Payment Terms:	T/T, L/C
Supply Ability:	1000pcs/week

Contact Now

Detailed Product Description

Output Capacity:	2250/2475kVA	Output Power:	2000/2200kW
Genset Type:	Hidier	Engine:	Perkins
Frequency:	50Hz / 60Hz	Cooling Type:	Water Cooled
High Light:	Perkins Diesel Generator Set , Perkins Diesel Genset

Cooling Type Water Cooled Perkins Diesel Generators 2000KW 4-Stroke

HDP Series HDP2000/ HDP2000S

Model	Standby Power		Prime Power		Engine	Alternator		Control Panel
Model	KVA	KW	KVA	KW	Engine	Stamford	Hidier(Optional)	Model
HDP2000/S	2475	1980	2250	1800	4016-61TRG3	PI734G	HD1800	MRS10

Spec #1.1 Features
1	Excitation system: self-excited (AREP and PMG are optional)
2	ATS (automatic transfer switch) receptacle
3	Lockable battery isolator switch
4	Stainless galvanized zinc plates with strong corrosion resistance
5	Vibration isolators between the engine/alternator and base frame
6	Integrated wiring design
7	Base fuel tank for at least 8 hours running
8	Equipped with an industrial muffler
9	50℃ radiator
10	Top lifting and steel base frame with forklift holes
11	Drainage for fuel tank
12	Complete protection functions and safety labels
13	IP54 (soundproof sets), IP56 (control system)
14	Water jacket preheater, oil heater are available.
15	Double air cleaner, spare parts, special tools are available.
16	Custom-made is acceptable

Ratings and Performance Data
Engine Brand & Model:	Perkins 4016-61TRG3
Alternator Brand & Model:	Stamford PI734G
Control System:	ComAp InteliLite®MRS10
Noise Level@7m:	70.9-75.8
Frequency & Phase:	50Hz & 3 Phase
Engine Speed: RPM	1500
Structure Type:	HDP2000
	HDP2000S
Fuel Tank Capacity: L	HDP2000	/
	HDP2000S	/
Fuel Consumption: l/hr (100% Load)	Prime	470
	Standby	529

Generator Set	Length (L)	Width (W)	Height (H)	Net Weight kg
Model	mm	mm	mm	Net Weight kg
HDP2000	5000	2200	3200	10500
HDP2000S	12200	2400	3200	32700

Spec #1.2 Container Calculation
Generator Set Model	20’GP pcs	40‘GP pcs	40‘HQ pcs	Efficiency
HDP1500	N/A	N/A	N/A	N/A
HDP1500S	N/A	N/A	N/A	N/A

Spec#2 Engine Perkins 4016-61TRG3

Spec #2.1 General Data
Number of cylinders	16
Cylinder arrangement	Vee, 60°
Cycle	4 stroke
Induction system	Turbocharged
Combustion system	Direct injection
Compression ratio	13.6:1
Bore and Stroke	160 x 190 mm (6.3 x 7.5 in)
Cubic capacity	61.123 litres
Direction of rotation	Anti-clockwise viewed on flywheel
Cooling system	Water cooled
Total coolant capacity	316 litres
Total lubrication system capacity	237.2 litres (62.7 US gals)
Dimensions	L4542mm
	W2185 mm
	H3175mm
Total weight (dry)	5570 kg

Spec #2.2 Engine Output
Speed rpm	Run Type	Typical Output (Net)		Engine Power
		Typical Output (Net)		Gross		Net
		kVA	kWe	kWm	hp	kWm	hp
1500	Prime	1800	1440	1600	2144	1500	2010
	Standby	2250	1880	1975	2647	1875	2513
	Standby (maximum)	2500	2000	2183	2925	2083	2791

*Subject to conformance with ASTM D6751 and EN14214.

The above ratings represent the engine performance capabilities to conditions specified in ISO 8528/1, ISO 3046/1:1986, BS 5514/1. Derating may be required for conditions outside these; consult Perkins Engines Company Limited. Generator powers are typical and are based on typical alternator efficiencies and a power factor (cos θ) of 0.8.

Fuel specification: BS 2869: Part 2 1998 Class A2 or ASTM D975 D2.

Rating Definitions:

Prime Power: Power available at variable load in lieu of a main power network. Overload of 10% is permitted for 1 hour in every 12 hours operation.

Standby (maximum): Power available at variable load in the event of a main power network failure. No overload is permitted.

Spec #2.3 Fuel System
Type of injection		Direct
Fuel injection pump		Rotary
Fuel injector opening pressure		Multi-hole
Delivery/hour at 1500 rpm		23MPa
Electronic governor (optional)		Woodward LCG2
Fuel lift pump
Fuel lift pump pressure		Electrical
maximum suction head		120 - 150 l/h (211 - 264 pt/m)
maximum pressure head		30 - 75 kPa (4.4 - 10.9 psi) a
Fuel filter spacing		17 kPa
Governor type		3.0 m
Torque at the governor output		Woodward LCG2
Fuel specification
USA Fed Off Highway - EPA2D 89.330-96
Europe Off Highway - CEC RF-06-99
Fuel Consumption
Engine Speed	1500 rpm			1800 rpm
	UK g/hr		l/hr	UK g/hr	UK g/hr
At Standby Max power	1.73		7.9	1.73	1.73
At Prime Power rating	1.56		7.1	1.56	1.56
75% of prime power	1.18		5.4	1.18	1.18
50% of prime power	0.85		3.9	0.85	0.85

Spec #2.4 Cooling System
Total coolant capacity
Engine only		73 litres
Electropak (engine and radiator):
-temperate		207 litres
-tropical		210 litres
Thermostat operating range		71 - 85 °C
Coolant temperature shutdown		101 °C rising
Coolant immersion heater		4 kWe each
Radiator
Radiator face area		3,46 m²
Material and number of rows:
-charge air and water jacket		copper, 4 rows
Fins per inch and material:
-charge air and water jacket		brass, 12 rows
Water jacket cooling data
Temperate and Tropical -coolant flow		1020 litres/min
-coolant exit temperature (max) .		98 °C
-coolant inlet temperature (min)		thermostatic control
Max permissible external system resistance		kPa
Thermostat operation range		82 - 93 °C
Max. static pressure head on pump		30.4 kPa
Recommended coolant		50% anti freeze / 50% water. For complete details of recommended coolant specifications, refer to the Operation and Maintenance Manual for this engine model.
Duct allowance
Maximum additional restriction (duct allowance) to cooling airflow and resultant minimum airflow
Ambient clearance 50% Glycol	Duct allowance Pa		m³/sec
N/A	N/A		N/A
N/A	N/A		N/A

Spec #2.5 Induction System
Maximum static bending moment at rear face of block	1400 Nm
Maximum air intake restriction
-clean filter.	2 kPa
-dirty filter	4 kPa
-air filter type	Medium duty axial flow

Spec #2.6 Electrical System
type			Insulated return
alternator			24 volts with integral regulator
starter motor			24 volts
Starter motor power			16.4 kW
Number of teeth on flywheel			TBA
Number of teeth on starter motor..			9
Minimum cranking speed (0°C)			126 rpm
Cold start recommendations
Minimum engine cranking speed over TDC						120 rev/min
Minimum starting temperature	Grade of engine lubricating oil	Battery specifications
°C		BS3911 Cold start amps		SAEJ537 Cold cranking amps	Number of batteries needed		Commercial ref number
0	20W	540		740	1		647
-15	10W	540		740	1		647
-20	5W	600		780	1		655

Spec #2.7 Exhaust System
Exhaust outlet size (internal)	2 x 254 mm Table D flanges
Back pressure for total system	5 kPa

Emissions statement: Constant Speed Engines for use in Industrial, IOPU and ElectropaK applications: Certified against the requirements of EU Stage IIIA (Directives 97/68/EC, as last amended, for mobile applications).

Spec #2.8 Lubrication System
Lubricating oil capacity
-total system capacity		177 litres
-sump maximum	157,5 litres
-oil temperature at normal operating conditions to bearings 105 °C
Lubricating oil pressure
relief valve opens	415-470 kPa
Min oil pressure	120 kPa
-at maximum no-load speed		147 kPa
Oil flow at rated speed		/
Normal oil temperature		125 °C
Recommended SAE viscosity
A single or multigrade oil must be used which conforms API-CH-4 or ACEA E5.

Spec#3 Alternator Stamford P134G

CONTROL SYSTEM	SEPARATELY EXCITED BY P.M.G.
A.V.R.	MX341	MX321
VOLTAGE REGULATION	± 1 %	± 0.5 %	With 4% ENGINE GOVERNING
SUSTAINED SHORT CIRCUIT	REFER TO SHORT CIRCUIT DECREMENT CURVES
INSULATION SYSTEM	CLASS H
PROTECTION	IP23
RATED POWER FACTOR	0.8
STATOR WINDING	DOUBLE LAYER LAP
WINDING PITCH	TWO THIRDS
WINDING LEADS	6
MAIN STATOR RESISTANCE	0.0008 Ohms PER PHASE AT 22°C STAR CONNECTED
MAIN ROTOR RESISTANCE	2.42 Ohms at 22°C
EXCITER STATOR RESISTANCE	16 Ohms at 22°C
EXCITER ROTOR RESISTANCE	0.043 Ohms PER PHASE AT 22°C
R.F.I. SUPPRESSION	BS EN 61000-6-2 & BS EN 61000-6-4,VDE 0875G, VDE 0875N. refer to factory for others
WAVEFORM DISTORTION	NO LOAD < 1.5% NON-DISTORTING BALANCED LINEAR LOAD < 5.0%
MAXIMUM OVERSPEED	2250 Rev/Min
BEARING DRIVE END	BALL. 6232 C3
BEARING NON-DRIVE END	BALL. 6319 C3
	1 BEARING				2 BEARING
WEIGHT COMP. GENERATOR	4054 kg				4022 kg
WEIGHT WOUND STATOR	2015 kg				2015 kg
WEIGHT WOUND ROTOR	1697 kg				1654 kg
WR² INERTIA	52.2511 kgm2				51.3341 kgm2
SHIPPING WEIGHTS in a crate	4127kg				4091kg
PACKING CRATE SIZE	216 x 105 x 154(cm)				216 x 105 x 154(cm)
	50 Hz				60 Hz
TELEPHONE INTERFERENCE	THF<2%				TIF<50
COOLING AIR	2.69 m³/sec 5700 cfm				3.45 m³/sec 7300 cfm
VOLTAGE STAR	380/220	400/231	415/240	440/254	416/240	440/254	460/266	480/277
kVA BASE RATING FOR REACTANCE VALUES	2135	2200	2200	2160	2475	2640	2695	2750
Xd DIR. AXIS SYNCHRONOUS	3.71	3.45	3.20	2.80	4.48	4.27	3.99	3.74
X'd DIR. AXIS TRANSIENT	0.21	0.19	0.18	0.15	0.25	0.24	0.22	0.21
X''d DIR. AXIS SUBTRANSIENT	0.15	0.14	0.13	0.11	0.18	0.17	0.16	0.15
Xq QUAD. AXIS REACTANCE	2.38	2.22	2.06	1.80	2.88	2.75	2.57	2.41
X''q QUAD. AXIS SUBTRANSIENT	0.28	0.26	0.24	0.21	0.34	0.32	0.30	0.28
XL LEAKAGE REACTANCE	0.03	0.03	0.03	0.03	0.04	0.04	0.04	0.04
X2 NEGATIVE SEQUENCE	0.20	0.19	0.18	0.15	0.25	0.23	0.22	0.21
X0 ZERO SEQUENCE	0.04	0.04	0.03	0.03	0.05	0.04	0.04	0.04
REACTANCES ARE SATURATED VALUES ARE PER UNIT AT RATING AND VOLTAGE INDICATED
T'd TRANSIENT TIME CONST.	0.16s
T''d SUB-TRANSTIME CONST.	0.01s
T'do O.C. FIELD TIME CONST.	2.89s
Ta ARMATURE TIME CONST.	0.02s
SHORT CIRCUIT RATIO	1/Xd

Spec#4 Control System ComAp InteliLite® MRS10

Cooling Type Water Cooled Perkins Diesel Generators 2000KW 4-Stroke 3

Spec #4.1 Features
1	Automatic or manual start/stop of the gen-set
2	Push buttons for simple control, lamp test
3	Lockable battery isolator switch
4	Graphic back-lit LCD display 128×64 pixels
5	2 LED indicators
6	Integrated wiring design
7	Parameters adjustable via keyboard or PC
8	Generator measurements (50/60 Hz):U1-U3, I1-I3, Hz, kW, kVAr, kVArh, kWh
9	Selectable protections alarm/ shutdown
10	3 phase Generator protections – Over-/under voltage – Over-/under frequency – Current/voltage asymmetry – Overcurrent/overload
11	Analog oil pressure, water, temperature, fuel level, battery, voltage, engine speed (pick-up)
12	Configurable programmable inputs and outputs
13	Warm-up and cooling functions
14	RS232 interface (AT-LINK CONV cable is necessary for IL-MRS 10)
15	Dimensions 180×120 mm (front panel)
16	Sealed to IP65
17	Custom-made is acceptable

Spec #4.2 Functions
Binary inputs/oupputs	6/6
Analog inputs	3
Pick-up	-
AMF function	-
Input configuration	●
Output configuration	●
Voltage measurement Gen./Mains	3ph/-
Current measurement	3ph
KW/KWH measurement	●/-
GCB/MCB control with feedback
Extension units(periph)	-
Communication interfaces	Rs232
Modem support	-
Battery charging alternator circuit	●

Spec #5 Options
Items	Options	Select
Engine	Water Jacket Preheater
Engine	Oil Preheater
Alternator	Winding Temperature Measuring Instrument
	Alternator Preheater
	PMG
	Anti-damp and anti-corrosion treatment
	Anti-condensation heater
Generator Set	Tools with the machine	STND
Fuel System	Low fuel level alarm
	Automatic fuel feeding system
	Fuel T-valves
Enclosure	Open Type
	Silent/Super Silent Type
	Trailer Type
	Canopy/Enclosure Type
Lubricating sys	Oil with the machine
Exhaust Sys.	Protection board from hotness
Cooling Sys.	Front heat protection
Cooling Sys.	Coolant (-30°C)
Control System	Remote Control System
	ATS Control System
	Auto Synchronizing System
	Generator Set Output Cabinet
Control Panel	Czech·ComAp	STND
	China·Hidier
	Denmark·Deif
	U.K.·Deepsea
Voltages	415/240V
	400/230V
	380/220V
	220/127V
	200-115V