WM5050 Heavy Standard Automatic Electric Welding Vessel Manipulator Welding Equipment / Welding Center
Welding manipulator is a special machine, which can weld the vessels, steel structure in all orientation by various welding methods such as circumferential and long itudinal welding line.
The manipulator have many function: the boom may retracting by VFD change speed from 100-1000 mm/min , the welding head may fix on the cross slide , the welding power may fix beside the column. the flux recovery system was fixxed at the end of the boom.
Usually the bed was fixed on the earth , rotating by motor or hand, moving on the guider by motor.
The column and boom guider of our company all adopt widened rectangular type, These ensure stretching and lifting is in particular stable and reliable.
The machines of our company all adopt widened rectangular guide. Stretching and walking is in particular stable and reliable. The machine's walking for dual motor drive, no sliding phenomenon. Wishbone end load major (When our company used it in Anhui big profit ship, which can carry two people and flux, etc at the end). Batch export congener products also deep obtain customer recognition.
Product Application:
Welding manipulator is a special machine, which can weld the vessels, steel structure in all orientation by various welding methods such as circumferential and long itudinal welding line.
Main Function:
1, beam up/down by motor
2, beam ahead/back by motor (The speed may adjust by VFD)
3, column revolved by motor/hand
column fixxed on the ground
4, trolley move by motor
5, You may choose :cross slide by motor/hand,Oscillator,Flux recovery and transportation system,Welding power etc
The machines of our company all adopt rectangular guide. Stretching and walking is in particular stable and reliable. The machine's walking for 2 motors drive, no sliding phenomenon.
Specification
|
Type
|
Horizontal Retracting mm
|
Vertical Lifting mm
|
Column Rotation
|
Trolley Moving
|
Retracting Speed M/min
|
|
WM2020
|
2000
|
2000
|
By hand
|
By hand
|
0.12-1.2
|
|
WM3030
|
3000
|
3000
|
Motor
|
Motor
|
|
|
WM4040
|
4000
|
4000
|
Motor
|
Motor
|
|
|
WM5050
|
5000
|
5000
|
Motor
|
Motor
|
|
|
WM6060
|
6000
|
6000
|
Motor
|
Motor
|
|
|
WM7070
|
7000
|
7000
|
Motor
|
Motor
|
|
|
WM8080
|
8000
|
8000
|
Motor
|
Motor
|
|
|
Remote control box line length:12m
Cross fine-tuning:Manual or electric
|
Mechanical Structure Illustration
a)Column and Boom
Rectangular size is different according to the WM type.
b)Guider Units
This type adopts the way of combining the pinch roller and the guide pulley to clamp the guide rail,which makes the boom lift and retract smoothly.
c) Boom Retracting
The retracting type is:Motor--Worm gear reducer—gear shaft---the boom moving.The speed adjust by AC VFD,so the speed may change.
d)Column Revolving
Re-voling adopt motor worm gear and gears type. Rotary support may ensure the column revolving safety .
e)Cross Slide(motor)
The welding head was fixed on the cross slide. Slide adopt motor control.Usually the stroke is 100 mm
f)Electric Power Structure illustration
আপনার বার্তাটি 20-3,000 টির মধ্যে হতে হবে!
সামগ্রিক মূল্যায়ন
রেটিং স্ন্যাপশট
নিম্নলিখিতগুলি সমস্ত মূল্যায়নের বিতরণসব পর্যালোচনা