autoclave for aac plant

High Percision Steam Pressure Autoclave AAC Autoclave / AAC Block Plant Autoclave

1.High Percision Steam Pressure Product Description:

1)The autoclave is the large pressure vessel that can steam the pressurized bricks or normal bricks which is made from aerated concrete blocks, sand and pulverized fly ash, and then complete the reaction of Cao-SiO2-H2O.

2)the autoclave is also widely used in other productions that need to be steamed with high pressure. Autoclave is key equipment which has a widely application in building material factory to autoclaved cure different kinds of building materials. It is also used in areas of chemical, textile, wood, Glass, Brick, metallurgy, Rubber, military industry. Convenient operation, security and reliable are its advantages.

2. Material:

a) Q345R-GB713 of Hangang in Hebei.

b) 16MnIIlevel of making flange forging

c)  φ133×25 tube to make DN100 and the material is 20-GB9948.

3. Process:

a) After welding kettle door, it must proceed with annealing heat treatment.

b) Polish toothed cutter of flange of autoclave body, and carry out magnetic particle testing.

c) Use double scale container board, and ensure the longitudinal joint of each section.

d) Carry out the physical and chemical test (stretch, impact), ensure its strength.

e) Welds are 100% X-ray detection, then carry out hydraulic test of 2.1MPa after passing. The whole process is complete inspected by CSEI factory inspection, and leave factory after stamp and signature .

4. Security Measures:(Triple Security)

a).Hand speed reducer installs mechanical interlocking, and we don't move when there's pressure in kettle.

b).Equip with manual limited safety interlocking device, stuck kettle manually, then we can open the door.

c).Equip with electric limited safety interlocking device, using cooperatively with manual limit, and connect with electric cabinet, rotating electrical ark with pressure and sound-light alarm.