|
รายละเอียดสินค้า:
การชำระเงิน:
|
| เน้น: | Auxiliary machine |
||
|---|---|---|---|
chemicals / metallurgy Auxiliary equipment of pneumatic three way - TBDQ series
Table: Main Technical Parameters
| Model |
TBDQ 20×20×30 |
TBDQ 20×20×45 |
TBDQ 25×25×45 |
TBDQ 32×32×45 |
TBDQ 40×40×45 |
TBDQ 50×50×45 |
TBDQ 60×60×45 |
TBDQ 80×80×45 |
|
| Cylinder dia(mm) | 40 | 40 | 40 | 40 | 40 | 40 | 40 | 40 | |
| Working Pressure(Mpa) | 0.4-0.8 | 0.4-0.8 | 0.4-0.8 | 0.4-0.8 | 0.4-0.8 | 0.4-0.8 | 0.4-0.8 | 0.4-0.8 | |
| Capacity(t/h) | 40 | 50 | 50 | 100 | 150 | 200 | 300 |
400
|
|
Applicable Scope:
TBDQ Pneumatic Three-way is mainly used for the switching of bulk materials in the spouts during the flow in the grain, food, feed, oil and chemical products processing industries. It is an indispensable equipment for production process to realize automatic control.
Main Structure
TBDQ Pneumatic Three-way mainly consists of housing, rotating shaft, turning plate, inlet retaining plate, cylinder fixing plate, magnetic cylinder with valve.
Working Principle
TBDQ Pneumatic Three-way realizes the switching of flow of materials by driving the rotating shaft and turning plate to turn through cylinder. The turning plate is lined with macromolecular plate with good wearability. And inlet taper retaining plate is available so that the turning plate will not be blocked by materials and there is no materials leakage, and materials will not be carried outwards when the turning plate is turning. The turning plate can move freely with little resistance.
Features:
1. TBDQ Series Pneumatic three-way widely used for industries of grain, feed, flour , chemicals, and metallurgy;
2. It is for control of materials entering in and out. The cylinder is adopted to push connection rod to move and easy operation;
3. TBDQ Series Pneumatic three-way can be customized according to customer’s requirement.
Installation
1. During the installation of equipment, sealing measures should be taken for the connecting position of peneumatic three-way with pipes. Materials leakage is not allowed.
2. Air pipeline should not have air leakage.
Commissioning
1. An unloaded test should be made on the feeding gate. The turning plate should run flexibly and freely and there should not be crawl and vibration.
2. Adjust the one-way throttle valve or muffling exhaust valve to control the turning speed of the turning plate.
3. Adjust the position of magnetic switch so that the equipment turns to be in position.
Our Factory
Our workshop
Certification
ผู้ติดต่อ: Mr. wei
โทร: 18990909900
แฟกซ์: 86-190-457-3333
คะแนนโดยรวม
ภาพรวมการให้คะแนน
ต่อไปนี้คือการกระจายของเรตติ้งทั้งหมดรีวิวทั้งหมด